Home Amada Bending Automation

Bending Automation

Bending Automation

HRB ATC Series

The HRB Press Brake Series leverages industry-leading bending technology and a variety of production-enhancing features that can be customized to resolve your specific challenges. AMADA’s latest high-precision, hybrid drive series is manufactured at the Carolina Manufacturing Center which will expedite delivery to North American fabricators. The addition of AMADA’s patented Automatic Tool Changer (ATC) will enable you to achieve even the most complex tool setups in 4 minutes or less.

HRB 1003/2204 ATC

ASIS-Ad-728x90

The HRB Press Brake Series leverages industry-leading bending technology and a variety of production-enhancing features that can be customized to resolve your specific challenges. AMADA’s latest high-precision, hybrid drive series is manufactured at the Carolina Manufacturing Center in High Point, NC. In addition to providing precise bending results, the new HRB Series is engineered to ensure the utmost in versatility and ease-of- use.

The addition of AMADA’s patented Automatic Tool Changer (ATC) will enable you to achieve even the most complex tool setups in 4 minutes or less. Automatic tool changes eliminate time-consuming manual setup making it possible to seamlessly introduce rush jobs. AMADA engineered the ATC as an ideal solution for variable lot sizes and complex tool layouts. In addition, operators of varied experience levels can produce repeatable high-speed bending results. To learn more about the high-precision, customizable HRB Series of press brakes, contact your local AMADA representative.

Customizable features include:

  • Bi-S Sensor

  • L-Shift

  • Auto slide foot pedal

  • Custom sheet followers (SF1224TL)

  • Double clamp finger backgauge

  • Operator front support system

  • Digi pro

Standard features: 

  • AMNC 3i control w/built in bar code reader

  • A-Grip Auto ATC

  • 6-axis backgauge

  • Automatic crowning

  • 3-position foot pedal

  • AS-01 safety device

  • Side guard w/ interlock

  • 300 mm stopper

  • Step sppt w/ slide stop

HRB ATC Rush Jobs

HG ATC Series

AMADA’s HG servo/hydraulic press brake and Automatic Tool Changer (ATC) provide the optimal bending solution for high-mix, low-volume production. The HG ATC Series is an advanced system that achieves precise and economical bending results even in lot sizes of less than ten. The ATC performs tool changes quickly and precisely — eliminating costly delays associated with manual tool changes. As a result, you can triple or quadruple your number of bending setups per day. The ATC is equipped with 18 magazines for dies and 15 for punches — providing the flexibility to accommodate rush jobs seamlessly. Now, complex tool layouts can be precisely loaded in three minutes or less.

HG 1003 ATC

AMADA engineered the HG ATC as an ideal solution for variable lot sizes and complex tool layouts. The Automatic Tool Changer (ATC) can load the most complex tool layout within three minutes and allows operators of varied experience levels to efficiently utilize this bending system.

Quick tool setups achieved by the ATC gives users the ability to introduce rush jobs seamlessly and triple or quadruple the amount of setups performed each day (based on eight setups per day).

Additional HG-ATC features and benefits include:

  • Ideal solution for variable lot sizes and complex tool layouts

  • Increase the number of tool setups performed each day

  • Reduce operator experience requirements

  • ATC stores 86′ (26.4m) of tooling

  • New AMNC 3i control

  • Integrated bend sensor

  • Low energy consumption

HG 2204 ATC

The HG 2204 ATC enhances all of the standard features of the HG 1003 ATC by offering a longer bed length of 13-ft., 240 US ton pressure, and 112.8-ft ATC tool capacity. Quick tool setups achieved by the ATC gives users the ability to seamlessly introduce rush jobs and triple or quadruple the amount of setups performed each day.

The HG 2204 ATC is equipped with a factory-installed sheet follower to assist an operator while bending large and/or heavy parts. Parts that normally require multiple operators can now be efficiently handled by a single person, thereby reducing labor costs and reducing the hazards associated with bending these types of parts. When not in use, the sheet follower arms can be slid to the right side of the press brake for full machine accessibility.

Additional HG 2204 ATC features and benefits include:

  • Ideal solution for variable lot sizes and complex tool layouts

  • Increase the number of tool setups performed each day

  • Reduce operator experience requirements

  • ATC stores 112.8′ (26.4m) of tooling

  • New AMNC 3i control

  • 8-Axis Backgauge with L-Shift

  • Integrated bend sensor

  • Factory-installed sheet follower to assist operator

  • Low energy consumption

HG ATC Series – Drastically Reduces Tool Loading Times

HG 1303 Rm

The HG 1303 Rm Robotic Bending System was designed specifically for processing large parts — which typically require two operators to safely handle or are difficult to manage by a single operator. This automated bending system provides consistent, high-quality parts and process reliability while eliminating time-intensive, manual handling of large parts.

HG 1303 Rm Robotic Bending System

HG 1003 ARs

The HG ARs is a fully-integrated robotic bending system with a 6-axis robot, Automatic Gripper Changer (AGC), and Automatic Tool Changer (ATC) with patented AMADA tooling. Each stage of the bending process, including tool loading, gripper exchange, and robotic bending are all performed at fast speeds to maintain high levels of unmanned machine productivity.

HG 1003 Ars Robotic Bending System

EG 6013 AR

The EG 6013 AR is designed specifically for high speed bending of small complex parts, the whole system is designed for unmanned production of any volume size or part mix. Equipped with the world’s first twin servo electric drive mechanism, the EG AR offers high speed and high accuracy bending, with lower power usage and a compact footprint. Features such as automatic angle measuring, offline programming, multiple part load/unload stations and an automatic tool changer all add to the systems impressive list of production capabilities.

EG 6013 AR Robotic Bending Cell

Download bending automation brochures from the Amada America site:

Contact Us

Receive the latest news

Subscribe To Our Monthly Newsletter

Get notified about new articles


By submitting this form, you are consenting to receive marketing emails from: . You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact